The ADE5300 provides a local interface between an AC5100 advanced central controller and up to 8 card readers. From the ADE5300, the information held within the ID cards is transmitted to the AC5100.

Each time an access attempt is made the AC5100 verifies the data on the ID card and will then either allow or deny access.

The ADE5300 can be configured to control up to 8 doors separately or up to 4 doors that include both entry and exit readers. All variations / combinations are possible; for example, you can have six single-reader doors and 1 dual-reader door.

Auxiliary power supply	Card reader 8 x 400 mA, 9.7-12 VDC 1 x 1.5 A, 9.7-12 VDC
Dimensions (W x H x D)	250 x 287 x 50 mm
Field bus	RS485 two wire, half-duplex
Outputs relays	8 x Lock output (30 VDC, 2 A) 8 x Open-collector output (100 mA, 9.7-12 VDC) 2 x Fire override (30 VDC, 2 A)
Power supply	12 - 15 VDC up to +10% or 24 VDC, -15 up to +10%
Readers	8 x Wiegand/Clock&Data reader interfaces, or 1 x Siemens RS-485 reader interface for connecting up to eight readers
Inputs	8 x Door contact 8 x Request-to-exit 16 x Auxiliary All inputs unsupervised or supervised 2 x Fire override (normal or enhanced mode)
Power consumption	Max. 2 A at 12 V, max. 1.5 A at 24 V